Publications

Journal Articles (Research)

Alam, K., R. Bell, and W. K. Biswas. 2019. “Decreasing the carbon footprint of an intensive rice-based cropping system using conservation agriculture on the Eastern Gangetic Plains.“ JOURNAL OF CLEANER PRODUCTION 218: 259-272.
Alam, K., R. Bell, and W. Biswas. 2019. “Increases in soil sequestered carbon under conservation agriculture cropping decrease the estimated greenhouse gas emissions of wetland rice using life cycle assessment.” JOURNAL OF CLEANER PRODUCTION 224: 72-87.
Arceo, A., W. Biswas, and M. John. 2019. “Eco-efficiency improvement of Western Australian remote area power supply.” JOURNAL OF CLEANER PRODUCTION 230: 820-834.
Biswas, W. K., Y. A. Horr, C. Joll, and M. Rosano. 2019. “Techno-economic and Environmental Implications of the Use of a Closed Loop Water Recycling System in Qatar.” Chemical Engineering Transactions 72: 205-210.
Biswas, W. K., Y. A. Horr, C. Joll, and M. Rosano. 2019. “Assessing the Water Energy Nexus and Sustainability Benefits of a Closed Loop Water Treatment System in Qatar.” Chemical Engineering Transactions 72: 199-204.
DING, X. H., G. XU Guang, W. ZHOU Wei, W. K. Biswas, and X. Y. GUO Xing-yun. 2019. “Treatment of bauxite residue dust pollution by improving structural stability via application of synthetic and natural polymers.“ Journal of Central South University 26: 440-448.
Hoque, N., W. Biswas, I. Mazhar, and I. Howard. 2019. “Environmental Life Cycle Assessment of Alternative Fuels for Western Australia’s Transport Sector.” Atmosphere Online: 1-27.
Hoque, N., W. K. Biswas, I. Mazhar, and I. Howard. 2019. “LCSA Framework for Assessing Sustainability of Alternative Fuels for Transport Sector.” Chemical Engineering Transactions 72: 103-108.
Janjua, S. Y., P. K. Sarker, and W. K. Biswas. 2019. “Impact of service life on the environmental performance of buildings.” Buildings 9 (1)
Janjua, S. Y., P. Sarker, and W. K. Biswas. 2019. “Sustainability Assessment of a Residential Building using a Life Cycle Assessment Approach.” Chemical Engineering Transactions 72: 19-24.
Janjua, S., P. K. Sarker, and W. Biswas. 2019. “A Review of Residential Buildings’ Sustainability Performance Using a Life Cycle Assessment Approach.” Journal of Sustainability Research 1 (1): 1-29.
Lim, C. I., and W. K. Biswas. 2019. “Sustainability Implications of the Incorporation of a Biogas Trapping System into a Conventional Crude Palm Oil Supply Chain.” Sustainability 11 (3): 792-792.
Shaikh, F. U., P. Nath, A. Hosan, M. John, and W. Biswas. 2019. “Sustainability assessment of Recycled Aggregates Concrete mixes Containing Industrial By-Products.” Materials Today Sustainability online: 1-1.

Journal articles

Arceo, A., W. BIswas, and M. Rosano. 2018. “Review of Tools for Sustainability Assessment of Renewable Energy Technologies for Remote Area Power Supply.“ Journal of Fundamentals of Renewable Energy and Applications, Vol. 8:2.
Arceo, A., M. Rosano, and W. K. Biswas. 2018. “Eco‑efficiency analysis for remote area power supply selection in Western Australia.“Clean Technologies and Environmental Policy 20: 463-475.
Briscan, A., B. Ghadimi, and M. B. John.. “Sustainability assessment of flexible pavement design based on AustRoads design rules.“Journal of Engineering for Sustainable Development In press.
Casini, A., M. B. John, C. Mora, and F. Galizia.. “Multi-objective Model for Fresh Food Supply Chain Network Design with Multi-packaging Distribution System.“ International Journal of Production Economics In press.
Coffey, J., Ghadimi, B., Nikraz, H. and Rosano, M. 2018. “The modelling prediction of Haul Road Surface Deflection.” Journal of Transportation Geotechnics 14. pp. 136-145.
Dentchev, N., R. Rauter, L. Jóhannsdóttir, Y. Snihur, M. Rosano, R. Baumgartner, T. Nyberg, X. Tang, B. van Hoof, and J. Jonker. 2018. “Embracing the variety of sustainable business models: A prolific field of research and a future research agenda.“ Journal of Cleaner Production. Vol 194. pp. 695-703.
Liberatore, V., Ghadimi, B., Rosano, M., Ceravolo, R. and Russo, S. 2018. “Microstructural analysis of GFRP failure mechanisms after compressive load and temperature duress.“Composite Structures 203: 875-885.
Mincigrucci, L., Ghadimi, B., Rosano, M., Ceravolo, R. and Russo, S. 2018. “Comparative structural analysis of GFRP, reinforced concrete and steel frames”. Structures (submitted)
Noh, J., B. Ghadimi, S. Russo, and M. Rosano.. “Assessment of FRP pultruded elements under static and dynamic loads.“ Composite Structures. Vol 202:17-28.
Sullivan, K., Thomas, S. and Rosano, M., 2018. “How industrial ecology can be applied in new business models: synergies with the Sustainable Development goals.” Journal of Cleaner Production Vol. 174. pp237-246.
Say, K., Rosano, M., Wills, R. and Dargaville, R. 2018. “Supporting the Transition to Renewable Energy: A Complex Systems Approach.” Energy Policy (in press)
Sullivan, K., S. Thomas, and M. Rosano. 2018. “Using industrial ecology and strategic management concepts to pursue the Sustainable Development Goals.“ Journal Of Cleaner Production 174: 237-246.
2018. “Bi-objective design of fresh food supply chain networks with reusable and disposable packaging containers.“ Journal of Cleaner Production 184: 375-388.

Conference articles

Arceo, A., Biswas, W. and Rosano, M. “Comparative Life Cycle Assessment of Remote Area Power Supply in Western Australia.” 3rd International conference on low carbon Asia and beyond-. Bangkok, Thailand. November 2017.
Say, K. and Rosano, M. “A simulation framework for the dynamic assessment of energy policy impacts on customer PV-battery adoption and associated energy market impacts.” International Conference for Applied Energy. Hong Kong. August 2018.
Say, K., and M. B. John. 2018. “Evaluating the impact of policy decisions on customer renewable energy transitions.” In British Institute for Energy Economics 2018, Oxford, UK

Book chapters

Boswell, B., and W. K. Biswas. 2018. “Techno-Economic and Environmental Implications of Electricity Generation from Solar Updraft Chimney Power Plant in Meekatharra in Western Australia.” InTransition towards 10% Renewable Energy Sayigh, A., 31-47 UK: Springer, Cham.
Engelbrecht, D., W. K. Biswas, and D. Pritchard. 2018. “Integrated Spatial Technology Framework.” In Advances in Engineering Research. Victoria M Petrova., 107-140 USA: Nova Science Publishers.

Journal articles

Arceo, A., Rosano, M., Biswas W. Eco-efficiency analysis for remote area power supply selection in WA. Clean Techn Environ Policy. DOI 10.1007/s10098-017-1438-6.
Gideon, T., Biswas, W., Pritchard, D. Sustainability assessment of cattle herding in the North West region of Cameroon, Central Africa. Academic Journals, Vol 9 (10). 289-302. October 2017.
Ghadimi, B., Jungate, N., Rosano, M., Russo, S. Assessment of FRP Pultruded Elements under Static and Dynamic Loads. Composite Structures (2017).
Ghadimi, B., Russo, S., Rosano, M. Predicted mechanical performance of pultruded FRP material under severe temperature duress. Composite Structures. 176 (2916) 673-683.
Imberger, J., Marti, C.L., Dallimore, C., Hamilton, D.P., Escriba, J., Valerio, G. Real-time, adaptive, self-learning management of lakes. Proceedings of the 37th IAHR World Congress. August 13-18, 2017, Kuala Lumpur, Malaysia.
Adiansyah, Joni S., Haque, N. Rosano, M., Biswas, W. Application of a life cycle assessment to compare environmental performance in coal mine tailings management. Journal of Environmental Management. 199 (2017) 181-191.
Biswas, W., K., Lawania, K. Application of life cycle assessment approach to deliver low carbon houses at regional level in Western Australia. The International Journal of Life Cycle Assessment.
Simms, A., Hamilton, S., Biswas, K. Carbon footprint assessment of WA groundwater recycling scheme. Environmental Management.
Tranmer, A.W., Marti, C.L., Tonina, D., Benjankar, R., Weigel, D., Vilhena, L., McGrath, C., Goodwin, R., Tiedemann, M., Mckean, J., Imberger, J. A hierarchical modelling framework for assessing physical and biochemical characteristics of a regulated river. Ecological Modelling. 368 (2018) 78-93.
Vilas, M.P., Adams, M.P., Oldham, C.E., Marti, C.L., Hipsey, M.R. Fragment disperal and plant-induced dieback explain irregular ring-shaped pattern formation in a clonal submerged macrophyte. Ecological Modelling 363 (2017) 111-121.
Vilas, M.P., Marti, C.L., Adams, M.P., Oldham, C.E., Hipsey, M.R. Invasive macrophytes control the spatial and temporal patterns of temperature and dissolved oxygen in a shallow lake: A proposed feedback mechanism of macrophyte loss. Fronters in Plant Science. Vol 8 (2097).
Vilas, M.P., Marti, C.L., Oldam, C.E., Hipsey, M.R. Macrophyte-induced thermal stratification in a shallow urban lake promotes conditions suitable for nitrogen-fixing cyanobacteria. Hydrobiologia, Vol 802 (2017).
Weigel, D.E., Vilhena, L.C., Woods, P., Tonina, D., Tranmer, A., Benjankar, R., Marti, C.L., Goodwin, P. Aquatic habitat response to climate-driven hydrologic regimes and water operations in a montane reservoir in the Pacific Northwest, USA. Aquatic Sciences.
Woodward, B.L., Marti, C.L., Imerger, J., Hipsey, M.R., Oldham, C.E. Wind and buoyancy driven horizontal exchange in shallow embayments of a tropical reservoir: Lake Argyle, Western Australia. Limnology and Oceanography. 00, 2017, 00-00.

Journal articles

Silva, A., Rosano, M., Stocker, L., Gorissen, L. From waste to sustainable materials management: Three case studies of the transition journey.
Biswas, W.K., Yek, P. Improving the carbon footprint of water treatment with renewable energy: a Western Australian case study. Renewables Wind, Waterand Solar. 2016. 3:14
Lawania, K.K., Biswas, W.K. Achieving environmentally friendly building envelope for Western Australia’s housing section: A life cycle assessment approach. Int Journal of Sustainable Built Environment.
Ghadimi, B., Nikraz, H., Rosano, M. Dynamic simulation of a flexible pavement layers considering shakedown effects and soil-asphalt interaction. Transportation Geotechnics 7 (2016) 40-58.
Ghadimi, B., Nikraz, H. A comparison of implementation of linear and nonlinear constitutive models in numerical analysis of layered flexible pavement. Road Materials and Pavement Design. 2016.
Lawania, K.K., Biswas, W.K. Cost effective GHG mitigation strategies for Western Australia’s housing sector: a life cycle management approach. Clean Techn Environ Policy DOI 10.1007/s10098-016-1217-9.
Adiansyah, J.S., Rosano, M., Vink, S., Keir, K. Stokes, J.R. Synergising water and energy requirements to improve sustainability performance in mine tailings management. Journal of Cleaner Production 133 5-17.
Cascini, A., Gamberi, M., Mora, C., Rosano, M., Bortolini, M. Comparative Carbon Footprint Assessment of commercial walk-in refrigeration systems under different use configurations. Journal of Cleaner Production. 112 (part 5): 3998-4011.
Dentchev, N., Baumgartner, R., Dieleman, H., Jóhannsdóttir, L., Jonker, J., Nyberg, T., Rauter, R., Rosano, M., Snihur, Y., Tang, X., et al. Embracing the variety of sustainable business models: Social entrepreneurship, corporate intrapreneurship, creativity, innovation, and other approaches to sustainability challenges. Journal of Cleaner Production. 113 (2016): 1-4.
Silva, A., Stocker, L., Mercieca, P., Rosano, M. “The role of policy labels, keywords and framing in transitioning waste policy. Journal of Cleaner Production. 115 (2016): 224-237.
Schluter, A. and Rosano, M. A holistic approach to energy efficiency assessment in plastic processing. Journal of Cleaner Production.
Mishima, K., Rosano, M., Mishima, N. and Nishimura H. 2016. End of Life Strategies for used mobile phones using material flow modelling. Recycling Journal, 1, 122-135.
Fatimah, Y.A., Biswas, W.K. Remanufacturing as a means for achieving low-carbon SMEs in Indonesia. Clean Techn Environ Policy. DOI 10.1007/s10098-016-1148-5.
Biswas, W.K., Naude, G. A life cycle assessment of processed meat products supplied to Barrow Island: A Western Australian case study. Journal of Food Engineering 1880, 48-59.
Rosenthal, C., Fatimah, Y.A., Biswas, W.K. Application of 6R principles in sustainable supply chain design of Western Australian white goods. ScienceDirect. Procedia CIRP 40. 318-323.
Ginting, Y.R., Boswell, B., Biswas, W.K., Islam, M.N. Environmental generation of Cold Air for Machining. ScienceDirect. Procedia CIRP 40. 649-653
Fatimah, Y.A., Biswas, W.K. Sustainability Assessment of Remanufactured Computers. ScienceDirect. Procedia CIRP 40 150-155.
Russo, S., Ghadimi, B., Lawania, K. and Rosano, M. Failure analysis using acoustic and energy emission assessment of fibre reinforced polymer material performance under severe conditions. Russo, S., Ghadimi, B., Lawania, K., & Rosano, M. Journal of Reinforced Plastics and Composites, 35(13), 1075-1090: 2016.
Leoni, B., Marti, C.L., Forasacco, E., Mattavelli, M., Soler, V., Fumagalli, P., Imberger, J., Rezzonico, S. and Garibaldi, L., 2016. The contribution of Potamogeton crispus to the phosphorus budget of urban shallow lake: Lake Monger, Western Australia. Limnology, 17(2): 175-182.
Marti, C.L., Imberger, J., Leoni, B. and Garibaldi, L., 2016. Using time scales to characterize phytoplankton assemblages in a deep subalpine lake during the thermal stratification period: Lake Iseo, Italy.Water Resources Research, doi 10.1002/2015WR017555

Conference articles

Biswas, W., Rosano, M and Lawania, K.
“Life cycle thinking: an important link in sustainability education”
To be presented at the ‘Engineering Education for Sustainable Development’ Conference, Belgium, September 2016. (Peer reviewed) (submitted)
Rosano, M., Hadgraft, R. and Ghadimi, B.
“The Challenge: Sustainable Engineering Education in Australia.”
Australian Association of Engineering Education Conference. Coffs Harbor, Australia Dec 4-7, 2016 (submitted)
Adiansyah, J
‘Comparing the carbon footprint of two different technologies in mine tailings management: a life cycle assessment perspective.’
Brunei International Conference on Engineering & Technology 2016. . Brunei. 13-17Nov 2016.

Journal articles

Russo S., Ghadimi, B. Lawania, K., Rosano, M. Residual strength testing in pultruded FRP material under a variety of temperature cycles and values. Composite Structure. 458-475.
Adiansyah, J., Rosano, M., Vink, S., and Keir, G. A framework for a sustainable approach to mine tailins management: disposal strategies. Journal of Cleaner Production. 1-13.
Khripko, D., Schlüter, A., Rommel, A., Hesselbach, D., Rosano, M. Energy Demand and Energy Efficiency Measures in Polymer Processing – Comparison between temperate and Mediterranean operating plants. International Journal of Energy and Environmental Engineering.
Biswas, W. A life cycle assessment of annual, perennial and non-fertilised perennial pastures South-Western Australia. International Journal of Agricultural Resources, Governance and Ecology, Vol. 11.
Abishek, S. King, AJC, Naranyanaswamy, R. Dynamics of a taylor bubble in steady & pulsatile co-current flow of Newtonian & shear-thinning liquids in a vertical tube. International Journal of Multiphase Flow, 74: 148-164.
Ghadimi, B. Nega, A and Nikraz, H. Simulation of shakedown behaviour in pavement’s granular layer. International Journal of Engineering and Technology, Vol.7, No.3.
Nega, A., Ghadimi, B., Nikraz, H. Developing master curves, binder viscosity and predicting dynamic modulus of polymer-modified asphalt mixtures. International Journal of Engineering and Technology, Vol.7, No.3
Nega, A., Nikraz, H., Herath, S., Ghadimi, B. Distress identification, cost analysis and pavement temperature prediction for the long-term pavement performance for Western Australia. International Journal of Engineering and Technology, Vol.7, No.4.
Engelbrecht, D., Biswas, W., Pritchard, D., Ahmad, W. Integrated spatial technology to mitigate greenhouse gas emissions in grain production. Remote Sensing Applications. 44-55
Lim, C. and Biswas W. An evaluation of Holistic Sustainability Assessment Framework for Palm Oil Production in Malaysia. Sustainability, 7, 16571-16587.
Lawania, K., Sarker, P., and Biswas, W. Global Warming Implications of the Use of By-Products of Recycled Materials in Western Australian Housing Sector. Material, 8(10), 6909-6925.
Chegenizadeh, A., Ghadimi, B., Nikraz, H., Heshmati, E. A novel numerical model approach for examining ship berthing impact on floating piers. Journal of Engineering Science & Technology.
Marti, C.L. and Imberger, J., 2015. A real-time management system for the Swan-Canning River Basin and its receiving waters, Western Australia, Australia. E-proceedings of the 36th IAHR World Congress, 28 June – 3 July 2015, The Hague, the Netherlands.

Conference articles

Sullivan, K. Thomas, S. and Rosano, M.
‘An Industrial Ecology based view of the Firm’. (Awarded – Best Conference Paper)
International Conference on Sustainable Development. Columbia, New York. September 2015.
Rosano, M., Hadgraft, R. and Ghadimi, B.
“A National Sustainable Engineering Challenge: improving engineering curricula across Australia.”
Australian Association of Engineering Education Conference. Torquay, Australia Dec 7-9, 2015.
Fatimah, Y. and Biswas, W.
‘Policy instruments for achieving sustainable manufacturing in Indonesian small and medium sized enterprises.’
International Conference on Remanufacturing, RAI Amsterdam 14-16 June 2015.
Ginting, Y. R., Boswell, B., Biswas, W. and Islam, M.
“Investigation into alternative cooling methods for achieving environmentally friendly machining process.”
In The 22nd CIRP conference on Life Cycle Engineering: Elsevier B.V.. UNSW Sydney.
Lawania, K., and Biswas, W.
“Carbon footprint and embodied energy consumption saving opportunities for Western Australia’s housing industries – A Life Cycle Management approach”
AusBuildLCA, The 1st Life Cycle Assessment Conference for Building and Construction, Melbourne, Australia, November 26-27, 2015

Journal articles

Biswas, W. K., D. Engelbrecht and M. Rosano. 2014. Carbon footprint assessment of Western Australian LNG production and export to the Chinese market. Int. J. Product Lifecycle Management 6 (4): 339-356.
Rosano, M., and Schianetz, K. 2014. Measuring sustainability performance in Industrial Parks: A Case Study of the Kwinana Industrial Area. International Journal of Sustainable Development Vol 17, No.3, 2014 261-280.
Chye Ing Lim, Biswas,W., Samyudia, Y. 2014. Review of existing sustainability assessment tools for Malaysian Palm Oil Production, Science Direct.
Ginting, Y.R., Boswell, B., Biswas, W., Islam, N. 2014. Advancing Environmentally conscious machining, Science Direct.
Biswas, W. K. 2014. Carbon footprint and embodied energy assessment of a civil works program in a residential estate of Western Australia. International Journal of Life Cycle Assessment 19: 732-744.
Mattiussi, A., Rosano, M., and Simeoni, P. 2014. A decision support system for sustainable energy supply combining multi-objective and multi-attribute analysis: An Australian case study. Decision Support Systems Vol 57, pp. 150-159.
Rosano, M. and Biswas, W. Deconstructing the sustainability challenge for engineering education. International Journal of Progress in Industrial Ecology. Vol. 9, No. 1, 82-95.
Rosano, M. 2014. Using industrial Ecology to assist with sustainability management in the materials engineering and resources sector. International Journal of the Society of Materials Engineering for Resources.
Wagner, J., M. Schafer, A. Schluter, L. Harsch, J. Hesselbach, M. Rosano, and C. Lin. 2014. Reducing energy demand in production environment requiring refrigeration – a localized climatization approach. HVAC and R Research 20 (6): 628-642.
G. Boscato, A. Dal Cin, S. Russo, F. Sciarretta (2014). Structural Health Monitoring of Historic Damaged Churches. Advanced Materials Research , 838-841, pp. 2071-2078
Barton, L., Thamo, T., Engelbrecht, D. and Biswas, W.K. Does growing grain legumes or applying lime cost effectively lower greenhouse gas emissions from wheat production in a semi-arid climate? Journal of Cleaner Production 83 194-203.
Imberger, J. and Marti, C.L., 2014. The seasonal hydrodynamic habitat. In Zohary, T., et al. (eds.), Lake Kinneret, Ecology and Management, Aquatic Ecology Series 6, Springer, pp. 133-157.
Silva, C.P., Marti, C.L. and Imberger, J., 2014. Mitigating the effects of high biomass algal blooms on the drinking water intakes of the city of Buenos Aires, Argentina. Journal of Hydraulic Research, 52(5): 705-719.
Silva, C.P., Marti, C.L. and Imberger, J., 2014. Physical and biological controls of algal blooms in the Río de la Plata. Environmental Fluid Mechanics, 14: 1199-1228.
Silva, C.P., Marti, C.L. and Imberger, J., 2014. Horizontal transport, mixing and retention in a large, shallow estuary: Río de la Plata. Environmental Fluid Mechanics, 14: 1173-1197.
Leoni, B., Marti, C.L., Imberger, J. and Garibaldi, L., 2014. Summer spatial variations in phytoplankton composition and biomass in surface waters of a warm-temperate, deep, oligo-holomictic lake: Lake Iseo, Italy. Inland Waters, 4: 303-310.
Machado, D., Marti, C.L. and Imberger, J., 2014. Influence of microscale turbulence on the phytoplankton of a temperate coastal embayment, Western Australia. Estuarine, Coastal and Shelf Science, 145: 80-95.

Conference articles

Wagner, J., Schäfer, M., Phan L., Schlüter, A. Khripko, D., Schafer, K. Hesselbach, D. and Rosano, M.
Localized climatisation of perishable products – Solutions for increasing energy efficiency.
AMSE 2014. International Mechanical Engineering Congress and Expo. Volume 8B. Heat Transfer and Thermal Engineering. Montreal, Canada. Nov 14-20 2014.
Rosano, R., Hadgraft, R., and King, R
‘Solving wicked sustainability problems: what specific knowledge and skills do students need to have to solve modern sustainability issues and those of the future’.
Australian Association of Engineering Education Conference, Brisbane., Australia.
2-4 December 2014.

Journal articles

Biswas, W.K., Thompson, B.C., and Islam, M.N. 2013. Environmental life cycle feasibility assessment of hydrogen as an automotive fuel in Western Australia. International Journal of Hydrogen Energy 38 pp. 246-254.
Biswas, W.K., Duong, V., Frey, P., and Islam, M.N. 2013. A comparison of repaired, remanufactured and new compressors used in Western Australian small- and medium-sized enterprises in terms of global warming. Journal of Remanufacturing Vol 3, 4.
Engelbrecht, D., Biswas, W.K., Ahmad, W. 2013. An evaluation of integrated spatial technology framework for greenhouse gas mitigation in grain production in Western Australia. Journal of Cleaner Production Vol 57 pp. 69-78.
Fatimah, Y.A., Biswas, W.K., Mazhar, I., and Islam, M.N. 2013. Sustainable manufacturing for Indonesian small- and medium-sized enterprises (SMEs): thecase of remanufactured alternators. Journal of Remanufacturing Vol 3, 6.
Biswas, W.K., and Cooling, D. 2013. Sustainability assessment of red sand as a substitute for virgin sand and crushed limestone. Journal of Industrial Ecology Vol 17, 5.
Mohammed, F. A., W. K. Biswas, H. M. Yao, and M. O. Tadé. 2013. Assessment of industrial by-product synergies from process engineering and sustainability principles. Progress in Industrial Ecology: an international journal 0: 0-0.
Biswas, W. K. 2013. Carbon footprint and embodied energy assessment of a civil works program in a residential estate of Western Australia. The International Journal of Life Cycle Assessment on-line.
Khripko, D., Schluter, A., Rosano, M., Hesselbach, J. 2014. Product carbon footprint in polymer processing – a practical application. Global Conference on Sustainable Manufacturing, Germany.
Boscato, G., Russo, S.(2013), Free vibrations of a pultruded GFRP frame with different rotational stiffnesses of bolted joints, Mechanics of Composite Materials 48 (6) , pp. 655-668. Impact Factor: 0.436.
C. Casalegno, A. Cecchi, E. Reccia, S. Russo (2013). Heterogeneous and continuous models: comparative analysis to investigate masonry wall subjected to differential settlements. Composites: Mechanics, Computations, Applications. An International Journal 4(3), pp. 187–207.
G. Boscato, C. Casalegno, S. Russo, J. T. Mottram (2013). Buckling of Built-up Columns of Pultruded FRP C-sections. ASCE Journal of Composites for Construction, (in press). Impact factor: 1.31.
G. Boscato, S. Russo (2013). Free vibrations of a pultruded GFRP frame with different rotational stiffnesses of bolted joints. Mechanics of Composite Materials 48 (6) , pp. 655-668. Impact Factor: 0.436.
Vilhena, L.C., Marti, C.L. and Imberger, J., 2013. The importance of nonlinear internal waves in a deep sub-alpine lake: Lake Iseo, Italy. Limnology and Oceanography, 58(5): 1871-1891.
Fornarelli, R., Galelli, S., Castelletti, A., Antenucci, J. P. and Marti, C.L., 2013. An inductive modelling approach to predict phytoplankton dynamics in a reservoir affected by inter-basin water transfers. Water Resources Research, 49: 1-16, doi: 10.1002/wrcr.20268
Hogg, C.A.R, Marti, C.L., Huppert, H.E. and Imberger, J., 2013. Mixing of an interflow into the ambient water of Lake Iseo. Limnology and Oceanography, 58(2): 579-592.
Fornarelli, R., Antenucci, J.P. and Marti, C.L., 2013. Disturbance, diversity and phytoplankton production in a reservoir affected by inter-basin water transfers. Hydrobiologia.
Contini, G.F., Ocampo, C.J., Macor, J.L., Elizalde Carrillo, E.R. and Marti, C.L., 2013. Low cost bathymetric and hydrodynamic data acquisition for mathematical modelling in water bodies, (in Spanish). Annals of the XXIV Argentinian National Congress of Water and III Symposium of Water Resources of the South Cone, San Juan, Argentina, 14-18 October 2013. (Paper on CD-ROM), 12 pp.

Conference articles

Rosano, M. and Duncan, D.
‘The Australian carbon farming initiative: early developments, ongoing challenges.’
Otemon University, Japan. Invited speaker for the Annual Australia Japan Research Symposium. February 2013
Khripko, D., Schluter, A., Rosano, M. and Hesselbach, J.
‘Product carbon footprint in polymer processing- a practical application’
Published peer reviewed Proceedings of the 11th Global Conference on Sustainable Manufacturing. Berlin, Germany, September 2013. ISBN 78-3-7983-2606-4 (Peer reviewed)
Biswas, W., Engelbrecht, D. and Rosano, M.
‘A life cycle assessment of Western Australian LNG production and export to the Chinese market.’
3^rd International Congress on Sustainability Science and Engineering . ICOSE. Pp 829-835. 2013.
King, R., Hadgraft, R., and Rosano, M.
“Sustanability content in Engineering Degrees”
AAEE2013 Conference, Gold Coast
Rosano, M. and Biswas, W.
‘Deconstructing the sustainability challenge for engineering education’.
Presented at the ‘Engineering Education for Sustainable Development’ Conference, Cambridge , England. September 2013. (Peer reviewed)
Rosano, M
‘Using industrial ecology to assist with sustainability management in the materials engineering and resources sector’.
Invited Speaker. Published Conference proceedings, Seventh International Conference on Materials Engineering for Resources (ICMR). Akita, Japan. November 2013.

Journal articles

Rosano, M. and Duncan, D. 2012. The Australian carbon farming initiative: early developments ongoing challenges. The Otemon Journal of Australian Studies. 38: 69-81.
Biswas, W.K. 2012. The importance of industrial ecology in engineering education for sustainable development, International Journal of Sustainability in Higher Education, Vol. 13 Iss: 2, pp.119-132.
Schluter, A., Rosano, M., Bohm S., and Hesselbach, J. 2012. Effects of implementing efficiency techniques in the plastics industry in Germany and Western Australia- a comparative modelling assessment. Proceedings of the International conference on Sustainable Manufacturing, 29th October-2nd November 2012, Istanbul, Turkey.
Latunij, F., Rosano, M. and Mullins, B. 2012. Study of waste, air emissions and sustainability management in West Australian small-medium manufacturing industries. Proceedings of the International conference on Sustainable Manufacturing, 29th October-2nd November 2012, Istanbul, Turkey.
Fatimah, Y. A., Biswas, W., Mazhar, I., Islam M. N. 2012. Sustainable Manufacturing for Indonesian Small and Medium sized Enterprises (SMEs): The Case of Remanufactured Alternators, 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, October 31st – November.
Gunady, M. G., Biswas, W. K., Solah, V. A., and James A. P. 2012. Evaluating the global warming potential of the fresh produce supply chain for strawberries, romaine/cos lettuces (Lactuca sativa), and button mushrooms (Agaricus bisporus) in Western Australia using life cycle assessment (LCA). Journal of Cleaner Production Vol 28 pp. 81-87.
G. Milani, S. Russo, M. Pizzolato, A. Tralli (2012). Seismic Behavior of the San Pietro di Coppito Church Bell Tower in L’Aquila, Italy. Open Civil Engineering Journal 6 (SPEC.ISS.1) , pp. 131-147
G. Boscato, M. Pizzolato, S. Russo, A. Tralli (2012). Seismic Behaviour of a Complex Historical Church in L’Aquila. International Journal of Architectural Heritage, DOI: 10.1080/15583058.2012.736013. Impact Factor: 0.370.
S. Russo, F. Sciarretta (2012). Masonry exposed to high temperatures: Mechanical behaviour and properties — An overview. Fire Safety Journal, 55, pp. 69-86. Impact Factor: 1.222
S. Russo (2012). Damage assessment of GFRP Pultruded Structural Elements. Journal of Composite Structures, Elsevier, 96, pp. 661-669. Impact Factor:2.231
S. Russo (2012). Testing and modelling of dynamic out-of-plane behaviour of the historic masonry façade of Palazzo Ducale in Venice, Italy. Engineering Structures, 46, pp. 130-139. Impact factor:1.713
S. Russo (2012). Experimental and finite element analysis of a very large pultruded FRP structure subjected to free vibration. Journal of Composite Structures, Elsevier, 94 (3), pp. 1097–1105. Impact Factor: 2.231
S. Russo (2012). On the monitoring of historic Anime Sante Church damaged by earthquake in L’Aquila. Structural Control health Monitoring, ISSN:1545-2263, doi:10.1002/stc1531. Impact Factor:1.544.
G. Boscato, D. Rocchi, S. Russo (2012). Anime Sante Church’s Dome After 2009 L’Aquila Earthquake, Monitoring and Strengthening Approaches. Advanced Materials Research 446-449 pp. 3467-3485
S. Russo, F. Sciarretta (2012). Experimental and Theoretical Investigation on Masonry after High Temperature Exposure. Experimental Mechanics, 52 (4), pp. 341-359. Impact factor: 1.336
S. Russo. On employment of FRP elements in constructions: the case of an All GFRP covering for historic structure Stroked by Earthquake. Journal of Civil Engineering and Architecture, USA. Impact Factor: 0.1101.

Conference articles

Schluter, A., Rosano, M., Bohm. S.,. and Calisir, N.
‘Effects of implementing efficiency techniques in the plastics industry in Germany and Western Australia: a comparative modeling assessment.’
Published Conference Proceedings, 10th Global Conference in sustainable manufacturing. Istanbul, Turkey. 1-3 November 2012. ISBN 978-605-63463-1-6 (Peer reviewed).
Latunij, F., Rosano, M. and Mullins, B.
‘Study of waste, air emissions and sustainability initiatives in Western Australian small- medium manufacturing industries.’
Published Conference Proceedings 10th Global Conference in sustainable manufacturing. Istanbul, Turkey. 1-3 November 2012. ISBN 978-605-63463-1-6
Fatimah, Y. A., Biswas, W., Mazhar, I., Islam M. N
“Sustainable Manufacturing for Indonesian SME. The case of remanufactures alternators.”
Published Conference Proceedings 10th Global Conference in sustainable manufacturing. Istanbul, Turkey. 1-3 November 2012.
Siriat, M.
“Personal computer LCA study: The Case of WA”.
Published Conference Proceedings 10th Global Conference in sustainable manufacturing. Istanbul, Turkey. 1-3 November 2012.
Rosano, M., Crossin, E.
“Sustainable Engineering Education Leadership Symposium.”
AAEE2012 Conference. Melbourne. 1-4Dec 2012.

Journal articles

Biswas, W. K., and Rosano M. 2011. A life cycle greenhouse gas assessment of remanufactured refrigeration and air conditioning compressors. International Journal of Sustainable Manufacturing Vol 2 No 2/3 pp. 222-236.
Rosano, M., Mattiussi, A., and Simeoni, P. 2011. Waste management in an industrial park – Industrial ecology benefits. Published conference proceedings Sardinia 2011. 13th International Waste Management and Landfill symposium. October 2011. ISBN: 978-88-6265-000-7.
Biswas, W. K., Rosano, M., Batt, P. and Noonan, J. 2011. Environmental supply chain management in Australian grain industries – A life cycle assessment approach, in Handbook of Corporate Sustainability: Frameworks, Strategies and Tools, Eds: Mohammed Quaddus and M. A. B. Siddique, Chapter 6, Edward Elgar, USA.
Biswas, W. K. 2011. Application of renewable energy to provide safe water from deep tubewells in rural Bangladesh. Energy for Sustainable Development Vol 15 No 1 pp. 55-60.
Biswas, W. K., Barton, L., and Carter D. 2011. Biodiesel production in a semiarid environment: A life cycle assessment approach. Environmental Science & Technology Vol 45 pp. 3069-3074.
Loden, D., and Biswas W. K. 2011. Review of the enhancement of university curriculum through utilisation of sustainable engineering and appropriate technology workshops, Proceedings of the 2011 AAEE Conference, Fremantle, Western Australia, pp. 75-81.
G. Boscato, S. Russo, F. Sciarretta (2011). Structural Monitoring of the Slender Double-Layered Façade of Palazzo Ducale in Venice – Preliminary Analysis of Measurements. Journal of the British Masonry Society, Masonry International, 24 (3), pp. 57-72
G. Boscato, J. T. Mottram, S. Russo (2011). Dynamic Response of a Sheet Pile of Fiber Reinforced Polymer for Waterfront Barriers. ASCE Journal of Composites for Construction, 15(6), pp. 974–984. Impact factor: 1.31.
S. Russo (2011). Case Study: Seismic design and construction of large pultruded FRP structure. IIFC newsletter, FRP International, 8 (2).

Conference articles

Rosano, M., Mattiussi, A. and Simeoni, P.
‘Waste management in an industrial park. Industrial ecology benefits’
Published conference proceedings, Sardinia 2011. 13th International waste management and landfill symposium. October 2011 . ISBN: 978-88-6265-000-7. (Peer reviewed)
Rosano, M.
‘Benefits of Industrial Ecology in improving sustainability performance in industrial production.’
Invited Speaker at the ‘Sunshine Coast World Environment Day Forum. University of the Sunshine Coast, Queensland. June 2011.
Rosano, M.
‘Benefits of Industrial Symbiosis – the Kwinana Industrial Area’
Invited Guest Speaker OECD European Cleaner Production Meeting. Copenhagen Denmark. July 2011

Journal articles

Biswas, W.K., Graham, J., Kelly K., and Rosano M. 2010. Global warming contributions from wheat, sheep meat and wool production in Victoria, Australia – a life cycle assessment, Journal of Cleaner Production 1-7.
Biswas W., Loden D. 2010. Enhancement of university curriculum and secondary school eduation through utilisation of sustainable engineering and appropriate technology workshops. Proceedings of the 2010 AaeE Conference, Sydney.
Giurco D., Bossilkov A., Patterson J., Kazaglis A. 2010. Developing industrial water reuse synergies in Port Melbourne: Cost-Effectiveness, Barriers And Opportunities, Journal of Cleaner Production.

Conference articles

Rosano, M.
‘Benefits of Industrial Ecology in Eco-industrial park development’
Presented at the Australian Industrial Ecology Network Conference, Sydney September 2010.

Journal articles

Biswas, W.K. 2009. Seawater desalination plant LCA, prepared for Worley Persons, East Perth 6004.
Biswas, W.K., and Rosano M. 2009. Cleaning up biofuel production in Australia- an LCA perspective, Bioenergy Australia 2009 “From Opportunity to Implementation”Radisson Resort, Gold Coast, Queensland.
Biswas, W.K., and Rosano, M. 2009. LCA of biodiesel from moringa oleifera seeds, 6th ALCAS conference Melbourne 17-19 February.
Biswas, W.K. 2009. Life cycle assessment of seawater desalination in Western Australia, World Academy of Science, Technology and Technology, Vol 35 pp. 399-405.
Biswas, W.K. and Rosano, M. 2009. Review of life cycle assessment research for the Australian Grain Industries. CAB Reviews: Perspectives in Agriculture, Veterinary Science, Nutrition and Natural Resources, Vol 4 No 16.
Giurco, D., Patterson, J., Bossilkov, A., and Kazaglis, A. 2009. Assessing industrial water reuse synergies: A Port Melbourne scoping study, 15th Annual International Sustainable Development Research Conference, Utrecht 5-8 July 2009.
Mullins B.J. 2009. Filtration of liquid mists – What goes in and what comes out?, Clean Air Society of Australia and New Zealand (CASANZ) International Conference, Perth.
Mullins, B.J., and Heim, M. 2009. Performance and calibration of optical particle counters – What are you really measuring?, Clean Air Society of Australia and New Zealand (CASANZ) International Conference, Perth.
Mullins, B.J., Mead-Hunter, Merkel, Braddock, Kampa and Kasper 2009. Modelling liquid saturation in filter collecting liquid aerosols, 18th World IMACS/MODSIM Congress, Cairns, pp. 1746-1752.
Van Beers, D., Bossilkov, A. and Lund, C. 2009. Development of large scale reuses of inorganic by-products in Australia: The case study of Kwinana, Western Australia, Resources, Conservation and Recycling, Vol 53 No 7 May 2009, pp. 365-378.
Latunij, F., M. Rosano, A. B. Bossilkov, and B. J. Mullins. 2009.“Air Emissions Reduction in WA through Cleaner Production Initiatives in the Kwinana Industrial Area.” In 19th International Clean Air and Environment Conference, Sep 6, 2009, Perth Western Australia: CAZANZ.
G. Boscato, S. Russo (2009). Free Vibrations of Pultruded FRP Elements: Mechanical Characterization, Analysis, and Applications. ASCE Journal of Composite for Construction, 13 (6), pp. 565-574. Impact Factor: 1.31.

Conference articles

Biswas, W. John, M. (2008)
‘Life Cycle Assessment of Biodiesel Production from Perennial Plants in Western Australia’
Presented at the 6th Australian Life Cycle Assessment Conference in Melbourne Feb 17-19, 2009.
Biswas, W., Graham, J., Kelly, K. and John, M.
‘Global warming contributions from wheat, sheep meat and wool production in Victoria Australia- a Life Cycle Assessment.’
Presented at the 6th Australian Life Cycle Assessment Conference in Melbourne Feb 17-19, 2009.
Biswas, W. and John, M.
‘LCA of biodiesel from moringa oleifera seeds’.
Presented at the 6th Australian Life Cycle Assessment Conference in Melbourne Feb 17-19, 2009.
Biswas, W., John, M. and Robson, S.
‘LCA of construction waste in Western Australia’,
Presented at the 6th Australian Life Cycle Assessment Conference in Melbourne Feb 17-19, 2009.
Biswas, W. and John, M.
‘Life Cycle Assessment of Aluminium Metal Production in Western Australia’.
Presented at the Life Cycle Management 2009 conference, Cape Town, South Africa, 6-9 September 2009.
Biswas, W. and John, M.
‘Life Cycle Assessment of Seawater Desalination in Western Australia’
Presented at the International Conference on Energy and the Environment, Singapore, 26-28 August 2009.
Biswas, W. and John, M.
‘Cleaning up Biofuel production in Australia- an LCA perspective.’
Presented at the Bioenergy 2009 conference, Gold Coast, 9-10 December. (Peer reviewed)

Journal articles

Biswas, W.K., and Merson, J. 2008. The socio-technical challenges of safe water supply in rural Bangladesh, in Combating Water Borne Diseases: A Global Perspective, Ed. Azmal Hussain, ICFAI University Press, Hyderabad, pp. 140-161.
Biswas, W. K., Barton L., and Carter D. 2008. Global warming potential of wheat production in South Western Australia: A life cycle assessment. Water and Environment Journal, Blackwell Publishing Ltd. Oxford.
Biswas, W.K. 2008. Life cycle assessment of building construction wastes in Western Australia, EarthCare, Perth.
Biswas, W.K. 2008. Life Cycle Assessment of Biodiesel Production from Moringa Oleifera Oilseeds, prepared for the Department of Agriculture and Food WA.
Biswas, W.K., Mullins, B.J., Lund, C.P. 2008. Life cycle environmental impact assessment of energy saving lamps, Proceedings of the Global Conference on Sustainable Product Development and Life Cycle Engineering Sustainability and Remanufacturing VI, pp. 241-244.
Biswas, W.K., Barton, L., and Carter, D. 2008. Life cycle global warming potential of LCA biodiesel canola in WA, Global Conference on Sustainable Product Development National University, Korea.
Biswas, W.K., and Mullins B. 2008. Life cycle environmental implications of the use of catalytic converters in vehicles operating on LPG and natural gas, presented in the Life Cycle Engineering conference in Sydney, March 2008.
Biswas, W.K., and John, M. 2008. Life cycle assessment of the grain supply chain in Australia – Cleaner Production Benefits, presented in the Life Cycle Engineering conference in Sydney, March 2008.
Biswas, W.K., Barton L., and Carter D. 2008. Global warming potential of wheat production in South Western Australia: A life cycle assessment. Journal of Water and Environmental Management, Vol 22 pp. 206-216.
Bossilkov, A., and Corder, G. 2008. Enabling tools and technologies for capturing regional synergies: Final Report, Centre for Sustainable Resource Processing, Perth, WA.
Bossilkov, A., and Lund, C. 2008. Market assessment for the reuse of inorganic industrial by-products in the Kwinana Industrial Area, Centre for Sustainable Resource Processing, Perth, WA.
Bossilkov, A. and Lund, C. 2008. Review of International and Australian frameworks and standards for the reuse of inorganicindustrial by-products, Centre for Sustainable Resource Processing, Perth, WA.
Bossilkov, A., Mullins,B., Biswas W.K., Schianetz, K., and John, M. 2008. Greenhouse opportunities for Western Australia., Report for Department of Industry and Resources, December 2008.
Bossilkov A., Lund C., Market assessment for the reuse of inorganic industrial by-products in the Kwinana Industrial Area, September 2008.
Corder, G.D. and Bossilkov, A. 2008. Increasing minerals industry by-product re-use through the application of a regional synergy toolkit, Conference of metallurgists 208, Winnipeg, Manitoba, Canada, August 2008.
Corder, G.D. 2008. Project 3C1: Developing local synergies in the Gladstone Industrial area: Final Project Report.
Giurco, D., Patterson, J., Bossilkov, A., and Williams, M. 2008. Industrial ecology opportunities in Melbourne: Scoping study – Port Melbourne, Confidential Report Prepared for Smart Water Fund, Melbourne.
Giurco, D., Patterson, J., Bossilkov, A., and Kazaglis, A. 2008. Assessing industrial water reuse synergies: A Port Melbourne scoping study.
Heim, M., Mullins, B.J., Umhauer, H., and Kasper, G. 2008. Performance evaluation of three optical particle counters with an efficient “multimodal” calibration method, Journal of Aerosol Science, Vol 39 No 12 pp. 1019-1031.
Lund, C., and Biswas, W. K. 2008. A review of the application of lifecycle analysis to renewable energy systems, Bulletin of Science, Technology & Society, Vol 28 pp. 200-209.
Pyankov O. V., Agranovski I. E., Huang R., Mullins B. J. 2008. Removal of biological aerosols by oil coated filters, Clean 36(7), 609-614.
Van Beers, D., Bossilkov, A., and van Berkel, R. 2008. A regional synergy approach to advance sustainable water use: a case study using Kwinana (Western Australia), Australasian Journal of Environmental Management, Vol 15 No 3 September 2008.
Van Beers D., Biswas W.K. 2008. A regional synergy approach to energy recovery: The case of the Kwinana industrial area, Western Australia. Journal of Energy Conservation and Management. Vol 49 No 11 November 2008, pp. 3051-3062
Van Beers, D. 2008. Capturing regional synergies in the Kwinana industrial area: 2008 Status Report.
S. Russo, G. Boscato, F. Sciarretta (2008). Behaviour of a Historical Masonry Structure Subjected to Fire. Journal of the British Masonry Society, Masonry International , 21 (1), pp. 1-14

Conference articles

Ali, R. and John, M.
‘Economic analysis of drainage systems in the Avon basin of Western Australia.’
Presented at the Second International Salinity Forum, Adelaide, March 31, 2008. (Peer reviewed)
Biswas, W and John, M .
‘Life Cycle Assessment of the Grain Supply Chain in Australia – Cleaner Production Benefits.’
Presented at the International Conference on Life Cycle Engineering, Sydney, Australia. March 2008. (Peer reviewed)
John, M.
‘Eco-industrial park research; Experience and lessons from Kwinana, Western Australia.
Industrial Ecology symposia, Kawasaki, Japan 8-10 December 2008.
John, M.
‘Energy and the environment: Ethics and responsibilities. An industry perspective.’
Presented at the Energy and Ethics Conference. University of Tennessee, Knoxville, Tennessee, USA. 10-12 April 2008.
John, M., Whyte, A. and Biswas, W.
‘Construction and Demolition Waste: Towards economic and environmental impact comparison guidelines’.
Waste and Recycle Conference 2008. Fremantle, Western Australia. 8-12 September 2008.
John, M.
‘Engineering sustainability or Sustainability engineering?’
Presented to the Australian Sustainable Development Institute, Public Lecture. Curtin University,
Perth, Western Australia. 23 October 2008

Biswas W., Barton L., and Carter D.W. 2007. Life cycle global warming potential of wheat production in Western Australia. International Conference on Climate Change. 29th- 31st May 2007, Hong Kong.
Bossilkov A. 2007. Toolkit application for regional synergy apportunities. 4th International Conference of the International Society for Industrial Ecology (ISIE), 17-20 June 2007, Toronto. (Presentation)
Factor A. 2007. Driving environmental change through participatory research: The case of organisational learning in an emergent Australian manufacturer. European Academy of Management Conference INSEAD, 16th – 19th May 2007, Paris.
Harris S. 2007. Industrial symbiosis in the Kwinana industrial area (Western Australia). Journal of Measurement and Control, Vol 29 October 2007.
Harris S. 2007. Regulatory and policy issues of regional synergies in the Kwinana industrial area: A scoping study. Funded by the Australian Research Council (ARC Project Lpo349203).
Harris S. 2007. The potential role of industrial symbiosis in combatting global warming. International Conference on Climate Change. 29th-31st May 2007, Hong Kong.
Regional resource synergies for sustainable development in heavy industrial areas: An overview of opportunities and experiences. Baseline assessment report, funded by the Australian Research Council (ARC Project Lpo349203).
Van Beers D., and Oughton C. 2007. Cooling update on regional synergy development in the Kwinana industrial area. International Conference on Engineering Sustainability, Perth.
Van Beers D. 2007. Capturing regional synergies in the Kwinana industrial area – 2007 Status Report. CSRP Report (Project 3B1)
Van Beers D., Corder G.D., Bossilkov A., and Van Berkel R. 2007. Regional Synergies in the Australian Minerals Industry: Case-Studies and Enabling Tools. Minerals Engineering, Vol 20 No 9 pp. 830-841.
Van Beers D. and Van Berkel R. 2007. Collaborative industry research to develop regional synergies: Experiences and lessons from Kwinana (Western Australia). (Presentation) 4th International Conference of the International Society for Industrial Ecology (ISIE), 17-20 June 2007, Toronto.
Van Beers D., Corder G.D., Bossilkov A, and Van Berkel R. 2007. Industrial Symbiosis in the Australian Minerals Industry: The Cases of Kwinana and Gladstone. Journal of Industrial Ecology, Vol 11 No 1 pp. 55-72.
Kingwell, R., and John, M. 2007. “The impact of farm landscape shape on the impact and management of dryland salinity.” Agricultural Water Management. 89: 29-38.
Kingwell, R., John, M. and Robertson, H. 2007. “A review of a community based approach to combating land degradation: dryland salinity management in Australia.” Environment, Development and Sustainability. 3: 27-37.

Altham W. 2006. Benchmarking to trigger cleaner production in small businesses: Drycleaning case study. Journal of Cleaner Production, Vol 15 No 8-9 pp. 798-813, Special Issue on Australia and New Zealand.
Brown G. and Stone L. 2006. Cleaner production in New Zealand: Taking stock. Journal of Cleaner Production, Vol 15 No 8-9, pp. 716-728, Special Issue on Australia and New Zealand.
Narayanaswamy V. and Stone L. 2006. From cleaner production to Sustainable production and consumption in Australia and New Zealand: Achievements, challenges, and opportunities. Journal of Cleaner Production, Vol 15 No 8-9 pp. 711-715, Special Issue on Australia and New Zealand.
Van Berkel R. 2006. Cleaner production and eco-efficiency initiatives in Western Australia 1996 – 2004. Journal of Cleaner Production, Vol 15 No 8-9 pp. 741-755. Special Issue on Australia and New Zealand.
Van Berkel R. 2006. Eco-efficiency in the Australian minerals processing sector. Journal of Cleaner Production, Vol 15 No 8-9 pp. 772-781, Special Issue on Australia and New Zealand.

Bossilkov, A., Van Berkel,R., Corder, R. 2005. Regional Synergies for Sustainable Resource Processing: a Status Report.
Van Beers, D., Van Berkel, R., Graedel, T.E. 2005. The Application of Material Flow Analysis for the Evaluation of the Recovery Potential of Secondary Metals in Australia.
Van Berkel, R., Narayanaswamy, V. 2005. Eco-Efficiency for Design & Operation of Minerals Processing Plants.
Narayanaswamy, V., Van Berkel, R., Altham, J & McGregor, M. 2005. Application of Life cycle assessment to enhance eco-efficiency of grains supply chains.
Van Berkel, R., Lund, C. 2005. Integrating the Environment & sustainability Agendas into Engineering Education at Curtin University.
Kurup, B., Altham, W., Van Berkel, R. 2005. Triple Bottom Line accounting applied for industrial symbiosis.
Van Berkel, R. 2005. Innovation & Technology for a Sustainable Materials Future.
Van Berkel, R., Van Beers, D., Bossilkov, A. 2005. Regional Resource Synergies for Sustainable Development: the case of Kwinana.
S. Russo (2005). Effect of FRP Mesh Rebar on the Shear Strength of Masonry. Journal of The British Masonry Society, Masonry International, 18 (1), pp.1-10.
John, M., Kingwell, R. and Pannell, D. Climate change and the economics of farm management in the face of land degradation: Dryland salinity in Western Australia.

Waste & Recycle 2005 Conference

Stone, L. From waste management to resource stewardship: Revisiting business; waste-related roles and responsibilities
Van Berkel, R. Waste prevention through business innovation

Proceedings – 6th Asia Pacific Roundtable for Sustainable Consumption & Production, 10-12 Oct 2005

Stone, L. The challenge of consuming less: the water sector as an example of evolving producer/consumer relationships.
Van Berkel, R. Industrial Symbiosis for sustainable resource processing: the cases of Kwinana & Gladstone (Australia)

11th International Sustainable Development Research Conference – Finland 2005

Bossilkov, A., Van Beers, D., Van Berkel,R. Industrial Symbiosis as an Integrative Business Practice in the Kwinana Industrial Area: Lessons Learnt & Ways Forward.

Altham, W.A. 2004. Benchmarking to Trigger & sustain the introduction of cleaner production in Small to Medium Sized Enterprises.
Stone, L., Van Berkel, R. 2004. Environmental Performance Measurement: A stepping-stone towards sustainability management.
Narayanaswamy, V, Altham, J., Van Berkel, R., McGregor, M. 2004.Environmental Life Cycle Assessment (LCA) Case Studies for Western Australian Grain Products.
Bossilkov, A., Van Berkel, R. 2004. Industrial Ecology in Practice in Kwinana: Waste reduction and resource efficiency through industry collaboration.
Altham, J., Van Berkel, R. 2004. Industrial Symbiosis for Regional Sustainability: An update on Australian initiatives. [11th International Sustainable Development Research Conference]
Van Berkel, R. 2004. Biting the Dust – Making Cleaner Production work for small businesses.
Van Berkel, R., Narayanswamy, V. 2004. Sustainability as a Framework for Innovation in Minerals Processing.
Van Berkel, R., Bossilkov, A. 2004. Sustainable Development Reporting in the Australian Minerals Processing Industry.
Van Berkel, R. 2004. Promotion and Implementation of Cleaner Production and Eco-Efficiency through Voluntary partnerships: the case of the Western Australian Cleaner Production Statement. [5th Asia Pacific Roundtable on Cleaner Production]

Narayanaswamy, V, Altham, J., Van Berkel, R., McGregor, M. 2003. Methodological Framework for Application of Environmental Life Cycle Assessment (LCA) Case Studies to Australian Grains.
Van Berkel, R. 2003. Managing for Sustainable Development – Using environmental management accounting & sustainable development reporting.
S. Russo, A. di Tommaso (2003). Shape influence in buckling of GFRP pultruded column. ASCE Journal of Mechanics of Composite Materials, 39 (4), pp.329-340.

Narayanaswamy, V., Altham, J., Van Berkel, R., McGregor, M. 2002. A Primer on Environmental Life Cycle Assessment (LCA) for Australian Grains.
Van Berkel, R. 2002. The Business Case for Sustainable Development. [ Waste & Recycle 2002 conference]
Van Berkel, R. 2002. Application of Cleaner Production Principles and Tools for Eco-Efficient Minerals Processing. [ Green Processing Conference]
Van Berkel, R. 2002. Cleaner Production Uptake in Small to Medium Sized Enterprises. [ Waste & Recycle 2002 conference]
Van Berkel, R. 2002. The Application of Life cycle Assessment for Improving the Eco-Efficiency of Supply Chains. [ Muresk 75th Anniversary Conference]

Altham, J. 2001. The application of benchmarking to encourage the adoption of Cleaner Production in the Drycleaning Industry.
Pagan, R.J., Prasad, P., Diniz da Costa, J.C., Van Berkel, R. 2001. Cleaner Production Applications for Coal utilisation.
Van Berkel, R. 2001. Cleaner Production for achieving Eco-Efficiency in Australian Industry.
Van Berkel, R. 2001. Cleaner Production perspectives 1: CP and industrial development.
Brereton, S., Van Berkel, R. 2001. Cleaner Production in Residential Building.
Van Berkel, R. 2001. Cleaner Production. Designing systems to prevent waste.
Van Berkel, R. 2001. Cleaner Production: an environmental health perspective.
Van Berkel, R. 2001. Status of Cleaner Production in Western Australia.
Van Berkel, R. 2001. The sustainable consumption challenge.
M. Arduini, S. Russo (2001). Bond in RC Member Ties with Composite and Stainless Steel Bars, in :Tension of Reinforced Concrete Prisms – Round Robin Analysis and tests on Bond – Report of RILEM TC 147-FMB, Editor(s): L. Elfgren and K. Noghabai
G. Creazza , S. Russo (2001). Crack width evaluation in FRP reinforced concrete members. Materials And Structures-RILEM, 34, pp. 119-125. Impact Factor: 0.917.

Van Berkel, R. 2000. Cleaner Production in Australia: Revolutionary Strategy or Incremental Tool?
Van Berkel, R. 2000. Cleaner Production for process industries.
Van Berkel, R. 2000. Life Cycle Assessment for Environmental Improvement of Minerals’ Production.
Van Berkel, R. 2000. Integrating the environmental & sustainable development agendas into minerals education.
Van Berkel, R. 2000. Cleaner Production perspectives for the next decade.
Van Berkel, R. 2000. Sustainable Development and Cleaner Production in Minerals and Energy Production.
Van Berkel, R. 2000. The sustainable development challenge for technology: will it work in time?
Donohue, R., Davidson, A., Peters, N., Nelson, S. and Jackowyna, B. 2000.Trends in nutrient concentrations discharged to the Swan and Canning Estuaries, Western Australia. Hydrological Processes.